How to Install Vista from USB/ Pen drive

If you ever installed Windows you might have observed that a fresh install of Vista DVD takes around 20 -30 minutes! Oh! I know that’s a lot of time, how about making it short? I know you want to. The trick is booting from a pen drive instead of a DVD rom. Using this trick you can complete the installation in less than 10 minutes! Ok so lemme keep it short and start with the tutorial, just follow the below instructions carefully:

Stuff required:
Windows Vista DVD
4GB Pen Drive or more


STEP 1: Selecting a Pen Drive
The first step is to get a fast pen drive. The pen drive must have good read and write speeds. Well, nowadays most the pen drives have good speeds. A drive with 25MB/sec. & a write speed-14MB/sec should do the job with ease.

STEP 2: Formatting the Pen Drive
Once you have a good pen drive you need to format it. Here’s how you do it:
Launch command prompt, you can do so by typing CMD in search bar and hitting enter. Now in command prompt type the following:

DISKPART> list disk

A list of external storage devices will appear. Make a note of your pen drive disk name. Assuming your disk name is disk 1 the following commands are computed. Change ‘disk 1’ to the correct disk name if it’s different. Now type the following commands:

select disk 1
create partition primary
select partition 1
format fs=fat32

Note: If you have multiple hard drives, like an SDFlash drive or a Multibay drive, you could end up wiping your second drive using this command. So make sure you select the right drive

STEP 3: Copy Windows Vista DVD content to the Flash Drive
In this step you need to copy the contents of the Vista DVD into the pen drive. To do so simply type the following command to start copying all the content from the Windows Vista DVD to your flash drive.

xcopy d:\*.* /s/e/f e:\

STEP 4: Setting the Boot Device
Once you’re done with copying the files. Shutdown the computer but don’t remove your pen drive. Now start your pc, and go into BIOS by pressing the ‘Delete’ key. Set the booting device to the pen drive. Save and Exit. That’s it, you can now install Vista from your pen drive.



8 comments for “How to Install Vista from USB/ Pen drive”

  • defiant

    How about the credit for the guy that actually wrote this?!DA410C7F7E038D!1665.entry

  • ashok

    i have a problem of installing vista from usb
    during installation when computer start. it start the window installation from starting
    any sol

  • tanmay

    i did the whole process and after changing the bios i receive an error something as ERROR LOADING PARTITION
    what to do?

  • Spagnum

    Thanks for this…

  • Joe

    If I complete this on my laptop, will I then be able to use the USB to install Vista 64 on another PC? AKA a new desktop that I am building?

  • Yeah Joe, you should be able to use the pen drive to isntall vista on any pc….

  • pratik

    please remove the pen drive after first installation(after first restart).

  • Cat Gher

    The simpler way to install Windows Vista from USB is FlashBoot utility.
    It automates everything.

web analytics